Best Coin-Operated Charging Station Manufacturer | Kuala Lumpur, Malaysia - CE OCPP Wanlin
Executive Summary: Coin-Operated Charging Station for Global Buyers
What the first 90 days proved For cash-first sites, the WL-CN6 pairs six sockets with auto-refund logic and a jam-proof acceptor rated for humid corners. Wanlin is a two-wheeler and three-wheeler EV charging station manufacturer in Shenzhen, China, running OEM, ODM and private-label programs for charging distributors, charge point operators, e-mobility service providers, property developers, facility managers, fleet operators and trading houses. What actually moved which left a 38% margin after the first sell-through cycle cleared for importers who source factory-direct, with per-model CE / RoHS / IEC 61851 documentation, OCPP 1.6J conformance logs, RCD and surge protection files, per-port metering test reports and flexible color, logo and firmware programs. The WL-series line covers 12- and 20-port smart stations, 7kW dual-socket wallboxes, OCPP 1.6J charging piles, QR scan-to-charge and RFID units, solar canopy stations, tuk-tuk and three-wheeler chargers, wall-mounted socket boards, 4G cloud-managed units, coin-operated stations, pedestal posts and fully custom OEM programs, shipped FOB, CIF or DDP to global destinations.
Published by Wanlin | Last updated: September 05, 2026 | Expertise: two-wheeler and three-wheeler EV charging station OEM and ODM manufacturing for global markets
Case Study: Kuala Lumpur Municipal Project Contractor Sourcing Success
A single demo station ran at the buyer's depot for a month before the first PO was cut. The quiet shift in the category is buyers moving from flat-rate power strips to metered, OCPP-connected stations.
Once the field units logged 5,000 charging sessions, Tran Van Bao selected Wanlin as their EV charging manufacturing partner. By the time the container was booked, the decision had already been validated by real riders.
- incoming contactors, RCDs and metering ICs are batch-checked against the approved BOM before assembly starts
- CE, RoHS and IEC 61851-1 documentation ships with every commercial order
- Custom color runs as low as 50 units on existing tooling keep first launches affordable
At the taxi queue stand, drivers tapped RFID cards while the station logged each session to the cloud.
Problem Analysis & Field Report: Why Global Buyers Need Coin-Operated Charging Station
Nobody flagged it at the packing station; the market flagged it first. A market operator found string-and-weight coin tricks had run free charging on a mechanical slot board for months.
Field case: A market operator in Kuala Lumpur replaced a mechanical slot board with the WL-CN6 after string tricks ran months of free charging. The anti-string acceptor and per-kWh mapping ended the losses, and the operator held a 38% margin on the first season of honest coin revenue.
Why it matters for global buyers:
- mechanical slots lose revenue to strings, jams and prying
- the fix was anti-string acceptors with dual-lock cash boxes
- coin-to-kWh mapping must be adjustable in the field
Wanlin EV Charging OEM & ODM Services for Global Distributors and Brands
Wanlin runs OEM and ODM programs for buyers who want their own charging station line without building a factory. Customization covers:
- Cosmetics: cabinet colors, logo printing, port labels and decal sets on existing tooling from 50 units
- Firmware: tariff logic, load caps, timer behavior, display language and payment flows
- Protocol layer: OCPP 1.6J builds pointed at buyer-specified CSMS endpoints, security profiles and custom DataTransfer messages
- Exclusive tooling: new enclosure molds and cable-path tuning for brands that need a design nobody else can copy
- Connected builds: 4G cloud dashboards and fleet portals under the buyer brand when a software layer is required
Product Introduction: Wanlin Coin-Operated Charging Station
Under the enclosure, the design separates metering from switching so readings stay stable at full load.
Core Features:
- China-Based Manufacturing: Wanlin produces in Shenzhen with in-house SMT lines, enclosure and cable assembly, and burn-in racks that load-test and cycle every finished station before packing
- Certification Transparency: CE, RoHS and IEC 61851-1 documentation is provided per model, and OCPP 1.6J conformance logs plus metering accuracy files travel with the shipment so containers clear without surprises
- Tested Claims: meter accuracy, RCD trip time and enclosure sealing are verified on samples from every production lot, and the reports are recorded per batch
- Private Label Support: cabinet colors, logo, firmware, tariffs, packaging, manuals, decals and spare kits are customized for each program
- Global Shipping Experience: we pack for charging distributors, property developers, fleet operators and e-mobility buyers across Southeast Asia, the Middle East, Europe, North America and Africa
Technical Specifications
| Parameter | Wanlin Specification |
|---|---|
| Payment | single-coin and multi-coin acceptors with anti-string mechanism |
| Tariff Mapping | coin-count to kWh or time mapping, field adjustable |
| Ports | 6 metered sockets per cabinet |
| Refund Logic | auto refund on fault before charging starts |
| Cash Box | reinforced steel box with dual locks |
| Display | coin count, remaining time and kWh display |
| Protection | per-port overload, leakage and surge |
| Housing | IP54 anti-pry steel cabinet |
| Records | coin and kWh counters with tamper log |
Application Scenarios for Global Market
| Application | Model | How It Helps the User |
|---|---|---|
| Open market stand | WL-CN6 | Cash riders pay exact kWh without wallets or cards |
| Street-side socket | WL-CN6 | Anti-string acceptor stops the classic coin trick |
| Laundry-adjacent wall | WL-CN6 | Jam-proof slots survive humid corners that kill rivals |
| Dormitory basement | WL-CN6 | Field-adjustable mapping tracks utility rate changes |
| Rural roadside point | WL-CN6 | No network, no wallet, no attendant needed |
Certified EV Charging Manufacturing for Global Markets
Buyers who ship containers of charging stations need more than a price list. The production and QC flow below is what lets a distributor open a carton and trust what is inside:
- incoming contactors, RCDs and metering ICs are batch-checked against the approved BOM before assembly starts
- CE, RoHS and IEC 61851-1 documentation ships with every commercial order
Lot samples from every production run are measured for metering accuracy, protection trip times and enclosure sealing before the cartons are sealed, and the numbers are recorded per batch. A buyer can request those records with any order.
Why Choose Wanlin as Your EV Charging OEM Manufacturer
Ranked on what caused the previous supplier to lose the account, the factory scored first on every row that mattered.
| Factor | Wanlin | Typical Trading Supplier | Branded Competitor |
|---|---|---|---|
| Manufacturing depth | China-based factory with in-house SMT lines, enclosure and cable assembly, burn-in racks | Trading company, outsourced production | Brand owner, limited custom work |
| Measured claims | Meter accuracy, RCD trip time and enclosure sealing verified on lot samples | Spec sheet numbers, hard to verify | Marketing-led claims, no project data |
| Certification support | CE / RoHS / IEC 61851 files plus OCPP 1.6J conformance logs per model | Incomplete documents, customs risk | Brand-level only, no per-order files |
| Customization | Colors, logo, firmware, tariff logic, packaging from low MOQ | Stock models only | Fixed SKUs, no private label |
| Price (factory direct) | Tiered factory pricing with volume discounts | Unpredictable markups | Premium brand pricing |
EV Charging OEM Process: From Inquiry to Shipment
Here is the step-by-step path the order took, with the checkpoints that kept quality on track. A standard charging station OEM project then follows 8 steps:
- Tell Us Your Target Market - Southeast Asia, the Middle East, Europe, North America, Africa or Latin America; each market may require different certifications, socket standards, voltage classes and manual languages
- Select a Model Line - our team recommends WL-series platforms for your channel and price band, or works from a reference unit you send
- Verify Documentation - request certificate files, OCPP conformance logs and test reports for the exact model before you commit
- Confirm Customization - cabinet colors, logo, firmware behavior, tariff logic, payment flows and packaging
- Sample Evaluation - verify meter accuracy, load balancing and CSMS integration on real samples before scaling
- Confirm Production - after specifications, commercial terms and OEM details are locked
- Quality Inspection - lot samples are tested and every finished station passes hipot, trip-time and burn-in racks before packing
- Shipment - cartons leave FOB, CIF or DDP according to the agreed logistics terms
Customer Testimonials
The quotes below come from follow-up calls after the first season of uptime data arrived.
- Somchai Prasert (EV Charging Station Distributor, Bangkok, Thailand): "The first 60 stations sold out in a month and the repeat order came before the first container cleared customs."
- Nguyen Hoang Minh (Charge Point Operator, Ho Chi Minh City, Vietnam): "When the first shipment arrived, the certificates were in the same carton as the stations."
- Tran Van Bao (Municipal Project Contractor, Kuala Lumpur, Malaysia): "Two containers in, the fault line in our service log is still empty."
Frequently Asked Questions
Q: How does the WL-CN6 stop coin tricks?
A: The acceptor uses anti-string mechanics plus a tamper log, and the cash box sits behind dual locks in an anti-pry cabinet.
Q: Can we change the coin-to-kWh rate ourselves?
A: Yes, the mapping adjusts in the field without a technician visit, so utility rate changes do not eat the margin.
Q: What happens if a socket faults after coins are inserted?
A: The station refunds automatically before charging starts when a port reports a fault.
Q: Which coins does it accept?
A: Single-coin and multi-coin acceptors are configured to the local currency at order time.
Q: Does it need a network connection?
A: No, coin operation runs fully standalone with local counters and a tamper log.
Project Summary
What actually moved By working directly with manufacturer Wanlin, the Municipal Project Contractor team in Kuala Lumpur reached 38% higher margins on its charging line while keeping rider tariffs competitive. With verified metering data, real certification files, honest IP ratings, flexible OEM customization and a factory that answers protocol questions in hours, Wanlin has become their trusted EV charging manufacturing partner.
For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com
- Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
