Product Center

The WANLIN-705 Smart Electrical Fire Monitoring Device with Residual Current and Temperature Channels ships with these headline parameters: alarm threshold residual current alarm 300 ma default adjustable 20-1000 ma, cable temperature alarm 70 deg c default adjustable 45-140 deg c, arc fault alarm on an 8 half-cycle pattern match, accuracy class residual current +/-1% of range, temperature +/-1 deg c, voltage and current class 1.0, arc fault detection sensitivity to 5 a series arcs, response time residual current alarm within 200 ms of threshold breach, temperature alarm within 5 s, arc fault within 100 ms of pattern confirmation, power supply 220-240v ac 50/60 hz from the monitored circuit, with a supercapacitor ride-through of 30 s for the last-gasp uplink drawing 2.5 w typical, 4 w with all four temperature channels active, output 4g lte cat-1 uplink with mqtt plus rs485 modbus rtu, direct to the cloud platform with a last-gasp alarm on supply loss, coverage one device per distribution board or sub-circuit, up to four temperature channels and one residual current channel per unit, alarm output local buzzer and relay output rated 5 a 250v ac plus platform alert, sms and voice escalation, ip20 panel-mount inside the board, ip54 with the surface-mount cabinet for dusty workshops enclosure, -25 deg c to +70 deg c with a conformal-coated pcb operating range and 108 mm x 90 mm x 66 mm, 420 g net. As of September 17, 2026, Wanlin Group (Shenzhen, China) officially launches its 2026 Belt and Road full fire product line export program, featuring the WANLIN-705 Smart Electrical Fire Monitoring Device with Residual Current and Temperature Channels as the flagship OEM and ODM model for overseas buyers, cross-border trading companies and regional distributors seeking a China-based source factory for fire detection, alarm, gas monitoring, process instrumentation, electrical fire monitoring and fire safety assessment devices under the Wanlin brand. The new release targets importers, fire protection contractors, MEP consultants, system integrators, facility management companies, property developers, social housing associations, insurers, wholesale distributors and public procurement tender bidders who source certified fire equipment directly from a Chinese manufacturer rather than paying the western brand premium of Honeywell, Siemens, Bosch, Apollo, Hochiki, Gent, Notifier or System Sensor. Wanlin Group as the Belt and Road wireless fire alarm system supplier, exporter and original manufacturer now opens its doors to global local partners, regional exclusive distributors, overseas cooperation partners and strategic OEM clients across 60+ destination markets.

Core parameters: WANLIN-705 Smart Electrical Fire Monitoring Device with Residual Current and Temperature Channels, residual current transformer plus ntc cable temperature probes plus arc fault pattern analysis on the supply waveform, with threshold and trend alarm logic. Sensing element split-core residual current transformer 20-1000 ma, four ntc cable temperature probes, voltage and current metering to class 1.0, arc fault detection on the 50/60 hz waveform. Alarm threshold residual current alarm 300 ma default adjustable 20-1000 ma, cable temperature alarm 70 deg c default adjustable 45-140 deg c, arc fault alarm on an 8 half-cycle pattern match. Accuracy class residual current +/-1% of range, temperature +/-1 deg c, voltage and current class 1.0, arc fault detection sensitivity to 5 a series arcs. Response time residual current alarm within 200 ms of threshold breach, temperature alarm within 5 s, arc fault within 100 ms of pattern confirmation. Power supply 220-240v ac 50/60 hz from the monitored circuit, with a supercapacitor ride-through of 30 s for the last-gasp uplink. Power consumption 2.5 w typical, 4 w with all four temperature channels active. Output signal 4g lte cat-1 uplink with mqtt plus rs485 modbus rtu, direct to the cloud platform with a last-gasp alarm on supply loss. Coverage area one device per distribution board or sub-circuit, up to four temperature channels and one residual current channel per unit. Alarm output local buzzer and relay output rated 5 a 250v ac plus platform alert, sms and voice escalation. IP rating ip20 panel-mount inside the board, ip54 with the surface-mount cabinet for dusty workshops. Operating temperature -25 deg c to +70 deg c with a conformal-coated pcb. Humidity range 10-95% rh non-condensing. Housing material polycarbonate v-0 enclosure with a metal gland plate and din-rail assembly. Dimensions and weight 108 mm x 90 mm x 66 mm, 420 g net. Certifications CCC / CCCF / GB 14287.2 / GB 14287.3 / CE / RoHS / REACH / FCC / 4G LTE Cat-1 carrier acceptance. The 2026 wireless range covers WANLIN-303 standalone 433 MHz smoke alarms to EN 14604 and GB 20517, WANLIN-307 and WANLIN-309 IoT smoke detectors on LoRaWAN, NB-IoT and 4G LTE Cat-1, WANLIN-340 rate-of-rise heat detectors in A1R, A2S, BR and CS classes to EN 54-5, WANLIN-222 resettable wireless call points to EN 54-11, WANLIN-656 sounder strobes to EN 54-3 and EN 54-23, WANLIN-860 wireless fire alarm panels to EN 54-2, EN 54-4 and EN 54-21, WANLIN-705 electrical fire monitors to GB 14287.2 and GB 14287.3, WANLIN-770 pressure gauges to EN 837-1 and WANLIN-780 level meters to EN 61326, WANLIN-365 combustible gas detectors to EN 50194 and GB 15322 with ATEX Ex d IIC T6, WANLIN-260 Wi-Fi home fire safety kits, WANLIN-868D LoRa concentrator gateways with Modbus TCP, MQTT and BACnet IP, WANLIN-710 Wi-Fi smart circuit breakers to GB 16917, and the A119-YW aerosol smoke test gun and heat detector tester for commissioning and periodic inspection rounds, shipped with CE, UKCA, UL, ULC, FCC, CCCF and SASO documentation packages.

Executive Summary - Wanlin Fire Full Product Line and Belt and Road Export

Executive summary - 12 buyer-relevant points:

• Flagship model WANLIN-705 Smart Electrical Fire Monitoring Device with Residual Current and Temperature Channels, residual current transformer plus ntc cable temperature probes plus arc fault pattern analysis on the supply waveform, with threshold and trend alarm logic
• Sensing element split-core residual current transformer 20-1000 ma, four ntc cable temperature probes, voltage and current metering to class 1.0, arc fault detection on the 50/60 hz waveform
• Alarm threshold residual current alarm 300 ma default adjustable 20-1000 ma, cable temperature alarm 70 deg c default adjustable 45-140 deg c, arc fault alarm on an 8 half-cycle pattern match
• Accuracy and response residual current +/-1% of range, temperature +/-1 deg c, voltage and current class 1.0, arc fault detection sensitivity to 5 a series arcs / residual current alarm within 200 ms of threshold breach, temperature alarm within 5 s, arc fault within 100 ms of pattern confirmation
• Power and consumption 220-240v ac 50/60 hz from the monitored circuit, with a supercapacitor ride-through of 30 s for the last-gasp uplink / 2.5 w typical, 4 w with all four temperature channels active
• Output signal 4g lte cat-1 uplink with mqtt plus rs485 modbus rtu, direct to the cloud platform with a last-gasp alarm on supply loss
• Coverage and notification one device per distribution board or sub-circuit, up to four temperature channels and one residual current channel per unit / local buzzer and relay output rated 5 a 250v ac plus platform alert, sms and voice escalation
• 15 wireless models and test tools from one factory: WANLIN-303 standalone smoke alarm, WANLIN-307 and WANLIN-309 IoT smoke detectors, WANLIN-340 heat detector, WANLIN-222 manual call point, WANLIN-656 sounder strobe, WANLIN-705 electrical fire monitor, WANLIN-860 fire alarm panel, WANLIN-770 pressure gauge, WANLIN-780 level meter, WANLIN-365 gas detector, WANLIN-260 home safety kit, WANLIN-868D gateway, WANLIN-710 smart circuit breaker and the A119-YW detector tester
• MOQ 100 pcs, lead time 20-30 days, EXW / FOB Shenzhen / CFR / CIF / DDP supported, 36 months warranty
• Flagship field reference Colombo port container freight station, Sri Lanka: A bonded warehouse with 14 m ceilings, rack storage to 11 m and a ceiling structure that c.
• Target buyer: importer, fire contractor, MEP consultant, system integrator, facility manager, distributor, cross-border trading company, public tender bidder
• Contact: wanlinfirecontrol@163.com / +8613261677119 / www.wanlinfire.com

This article is targeted at B2B buyers in Ashgabat, Turkmenistan who are evaluating wireless fire alarm systems sourcing options from China-based factories. Wanlin Group operates its own manufacturing facility in Shenzhen with dedicated SMT lines, AOI inspection, device calibration benches and a NIST-traceable instrumentation lab, exporting fire detection, alarm, gas monitoring, instrumentation, electrical fire monitoring and assessment devices to 60+ countries across Europe, North America, the Middle East, Southeast Asia, Africa, Oceania and Latin America under the Wanlin brand. Our WANLIN-series portfolio is engineered for OEM and ODM partners who require EN 54, ISO 7240 and UL type-test documentation, CE, UKCA, UL, ULC, SASO, SABER, BIS, SIRIM, TISI, SNI, DTI-BPS, CCCF and ActivFire market access support, custom protocol integration and stable long-term supply continuity for wholesale distribution, project contracting and public tender supply.

Belt and Road Fire Protection Market Overview and 2026 Buyer Demand

Belt and Road corridor markets now account for the fastest-growing share of global fire detection demand. Port, rail, industrial park, power, water, mining and housing programmes delivered under BRI financing push detection into markets where there is no legacy wired-loop installed base to protect, and where a 30-storey building may be the first on its block to carry a documented fire alarm system. Retrofit is the second engine: across South-East Asia, Central Asia and Africa a large installed base of 1990s and 2000s conventional panels is reaching end of life, and owners choose wireless because it avoids ceiling works in occupied buildings and because it can be delivered without a local panel service network. Contractors, importers and cross-border trading companies supplying Ashgabat, Turkmenistan increasingly source from China-based original manufacturers like Wanlin rather than legacy western brands, because the total cost of ownership of a Wanlin WANLIN wireless deployment is 35-55% below Honeywell, Siemens, Bosch, Apollo, Hochiki, Gent, Notifier or System Sensor distributor prices for the same type-test scope, and because one factory can cover detection, call points, sounders, panels, gateways, gas detection, electrical fire monitoring and fire water instrumentation on a single shipment.

Market access in Ashgabat, Turkmenistan is anchored on Turkmen state conformity assessment and the Ministry of Emergency Situations fire review, radiofrequency approval, Russian-language technical documentation, which requires a documented conformity route, a declaration referencing the applicable product standard, and third-party approval body involvement where the scheme demands it. Cross-border buyers are advised to verify the declaration, the type-test report and the approval body reference of every device prior to import, since non-compliant or un-certificated fire detection devices may be rejected by customs authorities, refused by the insurer, or invalidate the building fire certification.

Reference: EN 54 series and ISO 7240 harmonised standards, EN 14604, EN 50291 and EN 50194 product standards, NFPA 72 alignment, destination conformity schemes including SASO SABER, EAEU TR 043, SIRIM, SNI, TISI, BIS, BFP, KEBS PVoC and SONCAP, and Wanlin Group 2026 Belt and Road full fire product line export program documentation.

Fire Protection Product Engineering and Sensor Architecture

The WANLIN-705 Smart Electrical Fire Monitoring Device with Residual Current and Temperature Channels family is engineered on three architectural pillars: (1) a low-power sensing front end with a drift-compensated detection algorithm and a sealed optical, thermal, electrochemical, catalytic, ultrasonic or radar chamber that holds its alarm threshold across the full service interval; (2) a supervised loop and signal interface with short-circuit isolation and isolator support so a single fault never disables a loop; (3) a remote transmission path with Modbus, BACnet, OPC-UA, 4-20 mA, relay, NB-IoT, LoRaWAN and 4G LTE Cat-1 gateway options that integrates into third-party BMS, ARC, SCADA and cloud monitoring platforms. This architecture delivers a per-device cost point that undercuts western brands by 35-55% while keeping the type-test documentation, the declaration of conformity and the open integration that international specifiers and insurers expect.

Three sub-modules define the engineering depth:

• Sensing front end - Split-core residual current transformer 20-1000 mA, four NTC cable temperature probes, voltage and current metering to class 1.0, arc fault detection on the 50/60 Hz waveform. Residual current alarm 300 mA default adjustable 20-1000 mA, cable temperature alarm 70 deg C default adjustable 45-140 deg C, arc fault alarm on an 8 half-cycle pattern match holds the alarm threshold across temperature, humidity and contamination drift.
• Power and signal interface - 220-240V AC 50/60 Hz from the monitored circuit, with a supercapacitor ride-through of 30 s for the last-gasp uplink. 4G LTE Cat-1 uplink with MQTT plus RS485 Modbus RTU, direct to the cloud platform with a last-gasp alarm on supply loss plus 2.5 W typical, 4 W with all four temperature channels active covers new-build addressable loops, 4-20 mA instrumentation loops and legacy conventional zone retrofits.
• Alarm output and enclosure - Local buzzer and relay output rated 5 A 250V AC plus platform alert, SMS and voice escalation. One device per distribution board or sub-circuit, up to four temperature channels and one residual current channel per unit coverage plus IP20 panel-mount inside the board, IP54 with the surface-mount cabinet for dusty workshops housing keeps the site audible, visible and serviceable in harsh environments.

Featured Model - WANLIN-705 Smart Electrical Fire Monitoring Device with Residual Current and Temperature Channels Technical Signature

The featured model is WANLIN-705 Smart Electrical Fire Monitoring Device with Residual Current and Temperature Channels, part of the Smart Electrical Fire Monitoring Device - Residual Current, Cable Temperature and Arc Fault (LoRaWAN / 4G / 433 MHz) family, configured as the 4g lte cat-1 build (2 variant). FOB Shenzhen reference price is $62.00 per piece at MOQ 100 pcs, with bulk tier pricing ranging $53.94-$68.82 depending on detection class, measuring range, enclosure rating, output protocol variant, certification scope and packaging artwork. Lead time is 20-30 days from PO confirmation and 30% T/T deposit receipt, with 36 months warranty.

The unique technical signature of WANLIN-705 on this variant combination is documented in the table below. Every parameter listed is engineering-verified by our Shenzhen lab and cross-checked against the applicable EN 54, ISO 7240, UL or EN 837-1 product standard, the declaration of conformity scope, the system compatibility statement and the accuracy and response time requirement of the destination market.

Application Scenarios across Residential, Commercial, Healthcare, Industrial and Infrastructure Sites

Wanlin WANLIN-series wireless fire alarm systems are deployed across corridor markets on four continents: Jakarta and Manila transit and office fit-outs, Ho Chi Minh City and Dhaka export factories, Bangkok and Kuala Lumpur cold chain and data halls, Karachi textile and process plants, Colombo and Piraeus port warehouses, Almaty and Khorgos rail-served logistics, and Nairobi, Lagos, Cairo and Addis Ababa industrial park programmes. Below are 5 detailed scenarios drawn from field deployment records, each with a concrete site, device count, radio group count, commissioning duration and measured outcome rather than generic capability statements.

Scenario 1: Colombo port container freight station, Sri Lanka. A bonded warehouse with 14 m ceilings, rack storage to 11 m and a ceiling structure that changesevery time the racking is reconfigured. 148 WANLIN-307 detectors and 18 WANLIN-868D gatewayswere mounted on the rack tops rather than the ceiling so that they move with the racking, andthe 4G backhaul was chosen because the port authority would not permit a private LoRa antenna onits mast.

Scenario 2: Khorgos dry port logistics park, Kazakhstan. A transhipment warehouse on the China-Europe rail corridor where winter ambient drops to -34 degC. 210 WANLIN-340 heat detectors on the wide-temp SKU and 24 WANLIN-365 gas detectors werespecified with the low-temperature cell, and the indoor range was re-surveyed after rackingbecause steel racking at these temperatures changed the RF behaviour enough to move twogateways.

Scenario 3: Jakarta MRT station concourse, Indonesia. Phased station fit-out on an operating metro line where the concessionaire could not close aconcourse for longer than four night hours. 62 WANLIN-307 LoRaWAN smoke detectors, 18 WANLIN-222call points and 24 WANLIN-656 sounder strobes were installed on adhesive mounts over threeweeks, with a WANLIN-868D gateway in each technical room. The installer kept one A119-YW testerper two-person crew and logged every detector response time into the commissioning sheet, whichthe local fire brigade inspector then signed against. No ceiling coring was required.

Scenario 4: Surabaya palm oil bulk tank farm, Indonesia. A 14-tank palm oil terminal where the previous wired heat detection loop had been eaten throughby corrosion at the cable glands. 96 WANLIN-340 LoRaWAN heat detectors on stainless mountingplates and 8 WANLIN-868D outdoor gateways replaced the loop in 11 working days, with the tank-top detectors set to the A2S 60 deg C class because ambient shade temperature already sits at 41deg C. The panel now reports tank-top temperature every 15 minutes, which the operator uses as acrude but useful process check.

Scenario 5: Manila BPO tower night shift, Philippines. A 22-floor business process outsourcing tower running 24 hours with 3,100 seats. Because thefloors are never empty, the building owner chose 840 WANLIN-309 4G smoke detectors reportingstraight to the cloud rather than to a local panel: the facility team wanted alarm records tiedto a timestamp they could pull from anywhere, including the BFP inspector during an unannouncedvisit. Evacuation drills are run from the app on a per-floor basis so a drill never empties thewhole tower.

Wanlin Competitive Advantages for Cross-Border Fire Equipment Buyers

The WANLIN-705 Smart Electrical Fire Monitoring Device with Residual Current and Temperature Channels and the broader Wanlin WANLIN-series portfolio deliver 10 distinct advantages for cross-border B2B buyers who source wireless fire alarm systems directly from a Chinese manufacturer:

1. Source-factory pricing - Wanlin operates the SMT lines, the calibration benches and the instrumentation lab, so FOB Shenzhen fire equipment pricing is 35-55% below Honeywell, Siemens, Bosch, Apollo, Hochiki, Gent, Notifier or System Sensor distributor prices for the same type-test scope.
2. Full type-test documentation - every device family ships with the EN 54, ISO 7240 or UL test report reference, the declaration of conformity and the declaration of performance template, removing the largest documentation blocker for importers.
3. One platform, many national conformity routes - SASO SABER PCoC per SKU and SCoC per shipment for the Kingdom, ECAS for the UAE and G-Mark for the wider GCC, plus CE and UKCA for Europe, UL and ULC for North America, INMETRO for Brazil, BIS for India, SIRIM for Malaysia, TISI for Thailand, SNI for Indonesia, DTI-BPS for the Philippines, SABS for South Africa, SONCAP for Nigeria, CCCF for China and ActivFire for Australia, documented per SKU so the authority submittal and the approval review in each destination market complete in weeks rather than months.
4. Open integration instead of closed protocol - Modbus, BACnet, OPC-UA, 4-20 mA, relay, NB-IoT, LoRaWAN and 4G LTE Cat-1 gateways keep the site open to third-party BMS, ARC, SCADA and cloud platforms instead of a 15-year single-vendor lock-in.
5. Complete 15-model wireless portfolio from one factory - standalone and IoT smoke detection, wireless heat detection, combustible gas detection, wireless call points, wireless sounder strobes, the 860 wireless panel, the 868D gateway, the 705 electrical fire monitor, pressure and level instrumentation, the 260 home safety kit, the 710 smart circuit breaker and the A119-YW detector tester, all reporting on 433 MHz, LoRaWAN, NB-IoT, 4G LTE Cat-1 or Wi-Fi from a single Shenzhen source.
6. Hazardous-area capability - WANLIN-365 combustible gas detectors in the 316L stainless-steel IP66 housing are available with ATEX Ex d IIC T6 and IECEx documentation for LPG cylinder stores, petrochemical plants, refinery peripheries and commercial kitchen manifolds.
7. Instrumentation traceability - WANLIN-770 wireless pressure gauges and WANLIN-780 wireless level meters ship with NIST-traceable calibration certificates, 0.5% FS accuracy class and 316L wetted parts for fire pump discharge, sprinkler riser, foam concentrate tank and water storage duty.
8. IoT and predictive maintenance - WANLIN-705 smart electrical fire monitoring devices report residual current, cable temperature, voltage, current and arc fault events over LoRaWAN, NB-IoT or 4G LTE Cat-1, turning the annual electrical fire inspection into continuous monitoring.
9. Corridor-specific ODM depth - 433, 470, 868 or 915 MHz radio band selection, LoRaWAN, NB-IoT, 4G LTE Cat-1 or Wi-Fi uplink choice, high-temperature cells for 50 deg C plant rooms, IP65 and IP67 enclosures for dust and wash-down areas, destination-language labelling and manuals, SABER-ready and PVoC-ready technical files and carton artwork, engineered from one factory.
10. Warranty up to 60 months - 60 months for detector and call point families, 36 months for panel, monitor and gas detector families, 24 months for instrumentation and tester families, with free DOA replacement within 60 days.

Combined, these advantages allow Wanlin partners to win fire protection contracting packages, MEP consultant specifications, social housing retrofit programmes, hospital and elderly care projects, data centre and cleanroom protection contracts, industrial process safety packages, public procurement tenders and national distributor frameworks, secure regional distribution rights and serve end customers under their own brand at 35-55% lower landed cost compared to legacy western distribution channels.

Certifications, Standards Route and Market Access Compliance

The WANLIN-705 Smart Electrical Fire Monitoring Device with Residual Current and Temperature Channels carries the following certifications as standard scope: CCC / CCCF / GB 14287.2 / GB 14287.3 / CE / RoHS / REACH / FCC / 4G LTE Cat-1 carrier acceptance. Optional add-on documentation available on request includes VdS (Germany), LPCB (United Kingdom), ETL and FM (global insurance), UL and ULC (North America), ActivFire (Australia), CNBOP-PIB (Poland), TZUS (Czech), ATEX and IECEx for hazardous-area devices, SASO and SABER (Saudi Arabia), and EN 54-21 remote transmission configuration reports. All devices are produced in an ISO 9001:2015 and ISO 14001:2015 certified factory with RoHS and REACH declarations issued per batch.

Cross-border buyers should note that fire equipment compliance is a combination of the destination conformity route, the applicable EN 54, ISO 7240, UL or EN 837-1 product standard, a declaration referencing the approval body type-test, EN 54-13 system compatibility, EN 54-17 short-circuit isolation where applicable, EN 54-21 remote transmission for monitored systems, and RoHS, REACH and WEEE environmental compliance. Wanlin provides a pre-validated compliance package per model with DoP and DoC templates, test report copies, label artwork and installation manuals, reducing importer certification lead time from a typical 8-14 weeks to 2-4 weeks for most destination markets, including the SABER Product Certificate of Conformity file, the Arabic-English labelling set and the shipment documentation a Saudi importer needs to clear at Jeddah Islamic Port or King Abdulaziz Port Dammam.

Fire Equipment Economics, MOQ, Lead Time and Logistics Math

For a typical first-time buyer ordering 1000 pieces of WANLIN-705 Smart Electrical Fire Monitoring Device with Residual Current and Temperature Channels, the economics stack is:

Sample order cost is USD 120 per SKU refundable against the first bulk order above MOQ. 30% T/T deposit and 70% balance against B/L copy is the standard payment term. L/C at sight is accepted for orders above USD 80,000. Production lead time is 20-30 days. Warranty is 36 months. Free DOA replacement within 60 days of receipt.

Fire Equipment FAQ - OEM, ODM, MOQ, Certification, Lead Time, Partnership

Below are 8 frequently asked questions from overseas buyers, cross-border trading companies and regional distributors sourcing wireless fire alarm systems from China. Each answer is anchored on Wanlin actual commercial terms, certification scope and field experience across 60+ export markets under the Wanlin brand.

What is the difference between OEM and ODM when sourcing wireless fire devices from Wanlin?

Answer: OEM means Wanlin builds the device under your brand: your logo on the housing, your artwork onthe carton and your part number on the label, while the platform, the type-test report and thecertification file stay with Wanlin. ODM changes the product itself - detection principle, alarmthreshold, radio band, enclosure rating, output protocol, language set and packaging areengineered to your specification. In practice OEM ships in 15 to 30 days from an existingcertified platform, while ODM adds 6 to 10 weeks of engineering plus whatever time the approvalbody needs. The most common ODM requests on the WANLIN range are the radio band (433, 470, 868or 915 MHz), the uplink protocol (LoRaWAN, NB-IoT, 4G LTE Cat-1 or Wi-Fi), the cell type forhigh or low ambient temperature, the IP rating, and the language set on the label and manual.

Which Wanlin model should a project source for each area?

Answer: WANLIN-303 standalone 433 MHz smoke detector for apartments, villas and retrofit floors where noriser exists. WANLIN-307 and WANLIN-309 smoke detectors where you need reporting: 307 forLoRaWAN, NB-IoT or 4G site projects, 309 where the platform and the API integration matter.WANLIN-340 heat detector for kitchens, boiler rooms, dusty halls and any area where smokedetection has already produced nuisance alarms. WANLIN-222 call points and WANLIN-656 sounderstrobes for the evacuation chain. WANLIN-705 for electrical fire monitoring on distributionboards, WANLIN-710 where you also want remote breaker control and energy metering. WANLIN-860 asthe panel, WANLIN-868D as the gateway or where a panel-less cloud architecture fits better.WANLIN-770 and WANLIN-780 for pressure and level points that a fire pump or a tank alreadyneeds. WANLIN-365 for LPG and natural gas. WANLIN-260 for the home kit channel. A119-YW for thecommissioning and periodic test round.

How do I choose between LoRaWAN, NB-IoT, 4G LTE Cat-1, Wi-Fi and 433 MHz on a Belt and Road project?

Answer: Start from who owns the connectivity and what happens when it fails. 433 MHz standalone needs nonetwork at all, which is the right answer where there is no reliable carrier, no buildingnetwork and no budget for SIM fees - sites with daily grid outages or seasonal occupancy. Wi-Fifits homes and small commercial units that already have a router, and it is the cheapest way toget app reporting. LoRaWAN fits large single-owner sites - plants, campuses, warehouses -because you own the gateway and pay no subscription, but you must survey coverage after rackingand steelwork. NB-IoT gives deep indoor penetration and a five to eight year cell life on publiccarrier coverage where the operator supports it. 4G LTE Cat-1 costs more per device and needsmains or a larger cell, but it removes the gateway entirely and works anywhere with mobilecoverage, which is why remote sites and multi-tenant buildings often land on it.

Which certifications does Wanlin hold, and what does each destination market actually require?

Answer: The type-test base is the EN 54 series, EN 14604 for standalone smoke alarms, EN 50291 for CO,EN 50194 for gas, and the UL 217, UL 268, UL 521, UL 2034 and UL 864 set where the projectspecifies it, with CE and UKCA marking, RoHS, REACH and FCC Part 15 on the radio side.Destination markets then add their own layer: SASO and SABER for Saudi Arabia, EAC with EAEU TR043 for Russia, Kazakhstan and the EAEU, SIRIM and MCMC for Malaysia, SNI and Kominfo forIndonesia, TISI and NBTC for Thailand, BIS and WPC for India, PSQCA and PTA for Pakistan, BSTIand BTRC for Bangladesh, BFP for the Philippines, KEBS PVoC for Kenya, SONCAP for Nigeria, EACand the national fire service review for Central Asia. Wanlin supplies the test reports, thedeclaration of conformity and the technical file; the national conformity route itself isnormally lodged by the importer of record.

What are the MOQ, lead time, warranty and shipping terms for export orders?

Answer: MOQ starts at 100 units for a sample or pilot order on the standard platform and 300 to 500units for private label, with a lower threshold where several SKUs combine into one shipment.Lead time is 15 to 30 days for OEM from an existing certified platform and 6 to 10 weeks for ODMengineering on top of that. Warranty is 24 months on detectors and 36 months on panels, gatewaysand smart breakers. Shipments leave Shenzhen on FOB Yantian or Shekou, with CIF, CFR and EXWavailable and DDP where the buyer nominates the customs broker. Cartons carry the destinationlanguage label, the manual set and the certification documents required for the importingmarket.

How does the distributor and partner programme work?

Answer: There are four ways to work with Wanlin. A stocking distributor buys at a volume tier, holdsinventory in its own market and resells under the Wanlin brand, with a protected territory oncean annual volume is met. A private-label partner ships under its own brand with Wanlin handlingthe artwork, the labelling and the documentation in the partner name. A project partner works ona single named project, with Wanlin supplying the design submittal package, the layout drawing,the commissioning procedure and the acceptance-test documentation. A technical partner takesinstallation, commissioning and after-sales for its own market and receives factory training,the A119-YW test procedure, spare-part supply and remote engineering support.

What technical support does Wanlin give overseas partners?

Answer: Support starts before shipment with layout design, detector spacing and zoning, radio coverageplanning and the submittal package that the local authority will ask for. After shipment itcovers installation training, commissioning procedure, platform configuration, firmware updateand troubleshooting, delivered remotely by video and in writing, or on site for projectpartners. Partners receive the installation guide, the wiring diagram, the configuration guide,the testing procedure and the maintenance manual in the destination language, plus spare parts,replacement cells and the A119-YW tester. Remote diagnostics and OTA firmware updates mean mostfield issues are resolved without a return.

How does Wanlin compare with Honeywell, Siemens, Bosch, Hochiki, Apollo or Kidde?

Answer: The honest comparison is by what each side actually delivers. The European and Japanese brandshold the broadest local approval portfolios and the deepest installed base, and they are thesafe choice where a specification names them or where the insurer demands VdS, LPCB or FM.Wanlin competes on three things: unit cost at the same EN 54 type-test base, radio flexibilityacross 433 MHz, LoRaWAN, NB-IoT, 4G LTE Cat-1 and Wi-Fi on one platform, and ODM turnaroundmeasured in weeks rather than quarters. Where Wanlin is not the right answer, we say so: we donot hold every national approval in advance, we do not lodge local authority submissions on thebuyer behalf, and a project that needs a listed VdS or FM device tomorrow should buy thatdevice.

Wanlin Global Partner Stories - Real Project References across 50+ Markets

Wanlin WANLIN-series wireless fire alarm systems have been shipped to 60+ countries across 6 continents, with Indonesia, Vietnam, the Philippines, Malaysia, Pakistan, Bangladesh, Kazakhstan, Egypt, Kenya and Nigeria among the most active sourcing routes into corridor projects. Below are 4 anonymized case references drawn from actual projects completed in 2024-2026. Each case includes city, application scene and quantified outcome rather than generic marketing claims.

Case 1: Tashkent, Uzbekistan (textile plant modernisation). A Soviet-era textile plant replacing a partly dead wired loop took 890 WANLIN-307 detectors and12 WANLIN-860 panels, keeping the existing conduit only where a pull test proved it sound.Russian-language manuals and the EAC conformity file were supplied with the first shipment.

Case 2: Baku, Azerbaijan (hotel refurbishment without closing floors). A 320-room hotel refurbished floor by floor while staying open. 780 WANLIN-303 standalonedetectors went in on 433 MHz groups per wing because there was no spare riser capacity and therefurbishment budget did not cover opening walls. Azerbaijani and Russian labelling was appliedat the factory.

Case 3: Istanbul, Turkiye (shopping mall tenant churn). A mall where roughly a third of tenants change every two years needed detection that moves withthe fit-out. 1,100 WANLIN-303 standalone units on 433 MHz groups let each tenant take its owndevices when it leaves, and the mall owner keeps only the WANLIN-860 panel and the common-areadevices.

Case 4: Piraeus, Greece (port terminal warehouse upgrade). A terminal warehouse under EU CPR rules took 420 EN 54 compliant detectors with Greek-languagemanuals and the declaration of conformity in the technical file. The buyer was an EU-baseddistributor re-exporting into two neighbouring markets, so CE documentation and the EN 54 seriestest reports were provided in full rather than summarised.

Partnership Models - Authorized Reseller, Regional Distributor, Strategic OEM

Wanlin offers 3 partnership tiers for cross-border fire protection buyers and overseas cooperation partners:

All partners receive: free firmware updates for life of product, free DOA replacement within 60 days, dedicated account manager and WhatsApp response within 4 business hours, free certification documentation and test report copies, destination-language manual support, and one joint trade-show booth per year at Intersec Dubai, Security Essen, NFPA Conference, Firex International, Secutech, SICUR, FeuerTrutz, FireExpo or Canton Fair on a cost-share basis.

Conclusion - How to Start Your Fire Equipment Sourcing Today

Wanlin Group 2026 Belt and Road full fire product line export program is now open for global B2B buyers, regional distributors, fire protection contractors, cross-border trading companies and OEM and ODM partners across 60+ destination markets. To initiate a sourcing discussion, request a quotation or schedule a factory audit in Shenzhen, please contact our export team via the channels below. Sample orders ship within 3-7 days via DHL Express for in-stock SKUs; custom-configuration samples require 7-15 days. Standard lead time for bulk OEM orders is 20-30 days. Strategic OEM Partner applications are reviewed quarterly and require a minimum USD 320,000 annual commitment.

We sincerely invite global fire equipment buyers, national importers, fire protection contractors, MEP consultants, system integrators, facility management companies, social housing associations and cross-border fire equipment trading companies to engage in long-term cooperation with Wanlin Group as your China-based OEM and ODM partner, regional exclusive distributor or strategic global supplier under the Wanlin brand. Wanlin is the Chinese source factory behind 60+ country fire equipment projects, the SMT lines, calibration benches and instrumentation lab behind every batch, and this 12-section export program. Let us build safer buildings together.

Article signature:

working_principle: Residual current transformer plus NTC cable temperature probes plus arc fault pattern analysis on the supply waveform, with threshold and trend alarm logic
sensing_element: Split-core residual current transformer 20-1000 mA, four NTC cable temperature probes, voltage and current metering to class 1.0, arc fault detection on the 50/60 Hz waveform
alarm_threshold: Residual current alarm 300 mA default adjustable 20-1000 mA, cable temperature alarm 70 deg C default adjustable 45-140 deg C, arc fault alarm on an 8 half-cycle pattern match
accuracy_class: Residual current +/-1% of range, temperature +/-1 deg C, voltage and current class 1.0, arc fault detection sensitivity to 5 A series arcs
response_time: Residual current alarm within 200 ms of threshold breach, temperature alarm within 5 s, arc fault within 100 ms of pattern confirmation
power_supply: 220-240V AC 50/60 Hz from the monitored circuit, with a supercapacitor ride-through of 30 s for the last-gasp uplink
power_consumption: 2.5 W typical, 4 W with all four temperature channels active
output_signal: 4G LTE Cat-1 uplink with MQTT plus RS485 Modbus RTU, direct to the cloud platform with a last-gasp alarm on supply loss
coverage_area: One device per distribution board or sub-circuit, up to four temperature channels and one residual current channel per unit
alarm_output: Local buzzer and relay output rated 5 A 250V AC plus platform alert, SMS and voice escalation
ip_rating: IP20 panel-mount inside the board, IP54 with the surface-mount cabinet for dusty workshops
operating_temp: -25 deg C to +70 deg C with a conformal-coated PCB
humidity_range: 10-95% RH non-condensing
housing_material: Polycarbonate V-0 enclosure with a metal gland plate and DIN-rail assembly
dimensions_weight: 108 mm x 90 mm x 66 mm, 420 g net
certifications: CCC / CCCF / GB 14287.2 / GB 14287.3 / CE / RoHS / REACH / FCC / 4G LTE Cat-1 carrier acceptance

• Author: Wanlin Group Fire Detection Division Export Engineering Team
• Published: 2026-09-17 16:07
• Data sources: Wanlin Group 2026 Q1 fire device lab test report, EN 54 and UL type-test report references, SBC 801 and Saudi Civil Defence requirement check, SASO SABER PCoC and SCoC conformity files, EAEU TR 043 where the shipment enters the EAEU, CE and UKCA declaration of conformity, EN 54-13 system compatibility statement, EN 54-17 isolator verification, RoHS, REACH and WEEE declarations, NIST-traceable calibration certificates for instrumentation SKUs, approval body test report references.
• Shenzhen HQ: Wanlin Group (Wanlin Fire Detection Division), Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China


• Reference: www.wanlinfire.com / WANLIN-705 / EN 54 series / ISO 7240 / UL 217, UL 268, UL 521, UL 2034, UL 864 / EN 54-13 / EN 54-21 / SBC 801 / SASO SABER PCoC and SCoC / EAEU TR 043 / RoHS REACH WEEE
• Contact: Email wanlinfirecontrol@163.com | Phone +8613261677119 | Website https://www.wanlinfire.com